BIX-F53 Childbirth Skill Training Model: Setup & Use Guide

BIX-F53 Childbirth Skill Training Model: How to Run a Delivery-Mechanism Class

Short answer: BIX-F53 is a lower-body obstetric simulator — a simulated pregnant woman's lower body plus a fetal model with umbilical cord and placenta — built for basic technical training in obstetrics: prenatal examination, midwifery and delivery. Its distinguishing feature is a hand-cranked delivery mechanism that drives the fetal model through the delivery sequence step by step, so a class can be taught the mechanics of birth rather than only talked through them.

Key takeaways

  • One model, one continuous sequence. The hand crank reproduces engagement, descent, flexion, internal rotation, extension, restitution, external rotation and delivery.
  • Normal and abnormal delivery are both covered — the published feature list includes dystocia, midwifery technique and perineal protection practice.
  • The fetus is articulated. Flexible joints let the instructor set normal and abnormal fetal positions before the drill starts.
  • Twin delivery is included: the page lists multiple-pregnancy (twin) separation operation training.
  • Package data is published; price is not. This is a quotation item, not a listed-price item.

What the model contains, and what it lets you teach

Published componentTeaching use
Lower body of a simulated pregnant womanPrenatal examination, positioning and delivery posture.
Fetal model with flexible jointsSetting normal and abnormal fetal positions before a demonstration.
Umbilical cord and placentaCord and placental handling, including during fetal head aspiration.
Hand-cranked delivery mechanismThe full delivery mechanism sequence, driven repeatably and under instructor control.

The five published features, in plain terms

Published featureWhat it means in a lesson
The entire delivery process can be taughtThe model is a teaching instrument for the whole mechanism, not a single manoeuvre.
Fetus, umbilical cord and placenta taught during fetal head aspirationSupports cord and placental handling at the point where they matter clinically.
Fetus has flexible joints and can demonstrate a variety of normal and abnormal fetal positionsStudents see position before they see delivery — the correct order for learning.
Hand-cranked delivery mechanical componentsConnection, descent, flexion, internal rotation, upward extension, reset, external rotation and fetal delivery.
Comprehensive skills practiceNormal delivery, abnormal delivery (dystocia), midwifery technique, perineal protection and multiple-pregnancy (twin) separation.

Published specifications

ItemPublished value
ModelBIX-F53
CategoryPediatrics & GYN Models → Labor Mechanisms and Skills Training
Package size48 × 31 × 46 (as printed on the product page)
Weight10 (as printed on the product page)
Instruction manualAvailable for download from the product page
PriceNot published — quoted on request

How to run the class: a four-step sequence

  1. Set the position while the model is stationary. Use the articulated fetal joints to place the fetus in a normal position, then repeat with an abnormal position. Students should call the position before the crank is turned.
  2. Drive the mechanism slowly. Turn the hand crank and name each stage as it happens — connection, descent, flexion, internal rotation, upward extension, reset, external rotation, delivery. The mechanism is manual, so the instructor sets the pace.
  3. Repeat with dystocia. Re-set the fetus and run the same sequence in an abnormal presentation. The published feature list is explicit that abnormal delivery is supported, which is where the model earns its place: the same physical device, two very different lessons.
  4. Add perineal protection and twin separation last. Both are listed as supported practice; they are advanced steps and belong after the basic mechanism is secure.

Why physical obstetric simulation is used at all

The evidence base for obstetric simulation is now substantial enough to be systematic-reviewed rather than anecdotal. A systematic review of simulation-based teaching for obstetric emergencies in healthcare students examined effectiveness across studies [1], and a dedicated review of shoulder dystocia simulation training describes it as the accepted way to rehearse an obstetric emergency that cannot be practised on patients [2]. A randomised study went further and tested whether a virtual-reality version of shoulder dystocia training changed human and technical skills in caregivers [3] — relevant here, because a manual, hand-cranked mechanism is the opposite design choice: it trades digital realism for direct, repeatable physical control.

That is the honest framing of BIX-F53. It is a mechanism trainer. It will not simulate maternal physiology, and it will not score your students. What it does is let an instructor hold one step still and explain it, then run the sequence again — which is precisely what a first exposure to the delivery mechanism requires.

What the product page does not publish

Not stated on the pageWhy you need it before ordering
Material of the lower-body section and fetusDetermines how the model feels and how it is cleaned between cohorts.
Unit of measure for package size and weightThe page prints 48 × 31 × 46 and weight 10 without a unit; confirm cm/kg or in/lb so freight is calculated correctly.
Spare parts availability (cord, placenta, fetal joints)High-use consumables wear first; a multi-year teaching plan needs the replacement path.
Price at your order quantity and lead timeThis is a quotation item.

Send these questions to bomn@adabomn.com with the model number BIX-F53 and the quantity you are planning, and we will answer each line and attach the current supply data.

FAQ

Q1. What is BIX-F53?
It is a childbirth skill training model: a lower-body obstetric simulator with a fetal model, umbilical cord and placenta, fitted with a hand-cranked delivery mechanism for teaching the delivery process.

Q2. Which skills does it cover?
Prenatal examination, midwifery, normal delivery, abnormal delivery (dystocia), perineal protection and multiple-pregnancy (twin) separation operation training.

Q3. Can it show abnormal fetal positions?
Yes. The fetal model has flexible joints and the published feature list states it can demonstrate a variety of normal and abnormal fetal positions.

Q4. Is the delivery mechanism motorised?
No. The page describes hand-cranked mechanical components, so the sequence is driven manually by the instructor.

Q5. What are the size and weight?
The product page prints package size 48 × 31 × 46 and weight 10. The unit is not printed on the page, so confirm cm/kg with the supplier.

Q6. How do I get the price?
Price is not published. Email bomn@adabomn.com with the model (BIX-F53) and your quantity for a quotation, and ask for the carton unit and spare-part list in the same message.

Request a quotation

Write to bomn@adabomn.com for the BIX-F53 specification sheet and a quotation. If you are equipping a full obstetric skills room, ask about the neighbouring labour-mechanism models in the same enquiry so the set ships together.

References

  1. Effectiveness of Simulation-Based Teaching Methods in Learning Obstetric Emergencies Among Healthcare Students: A Systematic Review. Obstetrics and Gynecology International. 2026.
  2. Enhancing Obstetric Emergency Management Through Simulation-Based Training: A Focus on Shoulder Dystocia. La Tunisie Medicale. 2025.
  3. Impact of a virtual reality-based simulation training for shoulder dystocia on human and technical skills among caregivers. Scientific Reports. 2024.