BIX-Y1007 vs 70 cm and 170 cm Acupuncture Models: Sizing a Teaching Set Correctly

BIX-Y1007 vs 70 cm and 170 cm Acupuncture Models: Sizing a Teaching Set Correctly

Acupuncture teaching runs on one uncomfortable fact: a student can copy a point from a chart and still place the needle a finger-width away on a body. Model size decides how much of that gap the classroom can close. BIX-Y1007 is a 50 cm PVC male acupuncture model marked with 361 meridian points and 48 extra-meridian points, labelled in English on the left and Chinese on the right, weighing 11 kg with a 53 × 39 × 52 cm package. This comparison sets out which teaching job each size actually does, so a department buys one model instead of three it does not need.

ItemBIX-Y1007 (this model)70 cm models (e.g. ADA-502A)170 cm models (e.g. BIX-Y1003)
Height class50 cm, half-scale70 cm, roughly 40% scale170 cm, life-size
MaterialPVCPVCFull-body display model
Points marked361 meridian + 48 extra361 meridian + 48 extra14 meridians, points plus extra-meridian points
LabelsEnglish left, Chinese rightChinese-dominantMeridian courses drawn on the body
Package53 × 39 × 52 cm77 × 61 × 37 cm128 × 45 × 59 cm
Weight11 kg11 kg25 kg
Best useDesk practice, point naming, examsClassroom demonstrationPractical exams, patient education, photography

What a half-scale model can and cannot teach

At 50 cm, the whole point set fits inside a student's field of view, and the proportional distances between points stay readable. That is enough to teach point naming and point sequence: the student points to ST17, says what it is used for, and moves to the next point on the same meridian. It is also enough for written practical exams, because the examiner and the candidate can both see the same label.

What it cannot teach is depth and tissue. A 50 cm model compresses roughly 3.4 cm of real anatomy into about 1 cm of model surface, so needling angle and depth must be trained on a life-size model or on cadaver material. Treat BIX-Y1007 as a map, not as a needle target.

Why the bilingual labelling matters more than the size

The model prints the international alphanumeric code (HN3, ST17 and so on) on the left and the Chinese name on the right. Two consequences follow. First, students who will sit an English-medium examination rehearse the code they will be graded on. Second, an instructor can run a two-column drill — code on one side, classical name on the other — without a second model. Teaching materials that use a single naming convention tend to produce graduates who recognise one system and freeze in the other [1].

Where the 70 cm and 170 cm models take over

A 70 cm model is the usual demonstration size: large enough for a group of eight to twelve to see a point being located, small enough to move between rooms. A 170 cm model is a display and assessment object. It shows the full meridian courses on the body surface and is the size that matches a real patient, which is why it is used for practical examinations and for showing patients where a point sits.

The practical rule for a department is one 50 cm model per four students, one 70 cm model per teaching room, and one 170 cm model per examination room. Buying three 170 cm models for a class of thirty spends the budget on objects that cannot be handled simultaneously.

BIX-Y1007 specification

ItemDetail
ModelBIX-Y1007 (male body acupuncture model, 50 cm)
MaterialPVC
Height50 cm
Points361 meridian points + 48 extra-meridian points
LabellingEnglish (e.g. HN3, ST17) left side; Chinese right side
Package size53 × 39 × 52 cm
Weight11 kg
FinishNon-toxic PVC, resistant to cracking and deformation
Typical usersTCM students, acupuncture and massage trainees, patient education
PriceQuoted per order

Buying notes

  1. Confirm the labelling language pair. Some units ship Chinese-only. Ask for a photograph of the left and right surfaces before ordering.
  2. Check whether a stand is included. An 11 kg model used standing on a desk needs a base; a model that only lies flat limits demonstration.
  3. Order the English manual with the model. The bilingual labelling is only useful if the instructor can match code to indication.
  4. Plan storage. The 53 × 39 × 52 cm carton is the shipping size; a classroom needs shelf space for the assembled model, not the carton.

Quotation and specification. Current pricing, carton quantity and delivery times for BIX-Y1007 are available from bomn@adabomn.com.

FAQ

Q1. How many points does BIX-Y1007 mark? 361 points along the meridians and 48 extra-meridian points, labelled in English on the left and Chinese on the right.

Q2. Is 50 cm large enough for practical examinations? Yes for point identification and naming, because the labels are readable at desk distance. Not for needling depth, which needs a life-size model.

Q3. What material is it made from? PVC, described by the manufacturer as non-toxic and resistant to cracking, deformation and odour.

Q4. How heavy is it, and how does it ship? 11 kg, in a 53 × 39 × 52 cm package.

Q5. Can it be used for patient education? Yes, but a 70 cm or 170 cm model is easier for a patient to read while seated; the 50 cm model suits one-to-one explanation.

Q6. Does it include a stand or needles? The listing covers the model and instruction manual. Ask about a stand and consumables when requesting the quotation.

References

  1. Cho E, et al. Implementing a competency-based acupuncture training program in Korean Medicine education. PLoS One. 2026;21:e0345289. doi:10.1371/journal.pone.0345289
  2. Rao XD, et al. Practical experience of a virtual acupuncture and moxibustion teaching system in operation training. Zhongguo Zhen Jiu. 2020;40:877–879. doi:10.13703/j.0255-2930.20190708-k0002
  3. Preece D, et al. "Let's get physical": advantages of a physical model over 3D computer models and textbooks in learning imaging anatomy. Anat Sci Educ. 2013;6:216–224. doi:10.1002/ase.1345

For a quotation on BIX-Y1007 with the English manual and a desk stand, write to bomn@adabomn.com with your class size and the labelling language you teach in.